This 5 in 1 heat press machine with 2in1 digital controller is out now. This swing-away heat press boasts all of the must-have attachments. This includes flat platen, mugs and plates.It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc. Temperature setting: Press "SET", the upper display will showing "SP", and the lower of display will showing the temperature of last setting. Then enter into temperature setting option, press?
(increase or decrease) to set the needed temperature. After setting well, please press "SET", the upper display will show "SK" to go on the next step for time setting. Time setting: Press "SET" again, H1 LDE will showing "ST", then enter into the time setting. (increase or decrease) to setting the needed time. (Normally the time is 180 seconds for mugs and 15-20 seconds for t shirt printing) Fault diagnosis and solution: 1.If the controller box showing nothing when power on, there are 2 solutions: a. Please check the fuse wire, checking the glass wire to see if the wire damaged or fusing, if damaged, please change the wire. Open up the back cover of controller box, and examine the electricity box, to see if some thread fall off or not, if fall off, please match it accordingly.
When power on, if the controller display showing 3 lines, please take out the heating platen, and replaced it with another heating panel, or mug heater. If the display is normal, then maybe is the second situation of "b", the thread wire were disconnect. If still showing 3 line, then is the first situation of "a", the socket wire were fall out or break. Checking the inner wire of controller box, the white metal socket with 4 lines, please check if the thread is break or disconnect, if disconnect, please match it accordingly or replace it. Checking the wire of heating panel , the red cycle is showing the ends of the cable, one end is 3 thread, please replace 2 thread will be okay.When power on, the controller box showing values but cannot heating up: the display showing the actual room's temperature, please takes out the plug of head machine, and replaced it with other mugs heater or plate heater. If temperature is heating up normally, then will be the next situation "a", if cannot heat up, will be "b"situation. Checking the heating wire, the red cycle showing the ends of thread, please replace the white thread will ok. Open up the back cover, and examine the thread to see if some thread disconnected or break, if disconnected, please follow the above "a", if nothing showing, please following "b" to maintenance. If no break, then replace the controller box. The head controller box heating up normally, the other parts will be not heating up, please change the heating part directly.
The head machine's function is ok, but cannot count down, then please press the third button, this machine will count down. If still cannot count down, please replace the controller box.
Application: This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined.You can replace the heating plate easily and conveniently without using any special tools. Fahrenheit and Celsius scale are selectable. Allows pressure to be more evenly distributed across the entire platen when it is closed. Built-in structural support to maintain flatness. Detached cradle for use of the mug elements. Compact size and lightweight, as compared to standard mug cradles. P roper H eating T ime.
Power input : 110v(USA Plug). Temperature range : 32 - 430 Fahrenheit degree (0 - 250 Centigrade). Timer control : 0 - 999 seconds. Adjustable height : 13 1/2" to 17".
Platen Press (telfon-coated) : 12" x 10". Hat/Cap Press : 6"x 3"(curved). Plate Press #1 : 5 max diameter. Plate Press #2 : 6 max diameter.
Mug Press : 3"-3.5" diameter (11oz). 1 x Fully-assembled machine with platen press. Brand new 5 in 1 heat press machine.
Large 12" x 10" transfer element. Provides a big surface to create your own custom T-shirt. Temperature: set the desired temperature. Timer: set the desired time. Intelligent audible alarm after the transfer done.
Full 360-degree rotation of swing-away design. Allows the heating element to be moved safely aside. Can be adjusted according to the thickness of the material. Draw down the handle and wait until it alerts. 2 4/5in Long arm handle.
Comfortable rubber grip for everyday use and long production runs. Removable silicone pad and cotton pad.
It is elevated with dual supports. Built-in fuse for safe using. Adjustable feet for unevenly floor. Please contact our customer service team immediately if.
You changed your mind and wish to request a return. Your product was damaged during transit.
Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification.
We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products.We benchmark our products against high standards and that's why our customers keep coming back. The item "5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt /Mug/Plate Hat" is in sale since Tuesday, June 8, 2021. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses". The seller is "happy-shopping01" and is located in Buford, Georgia. This item can be shipped to United States.