Use with Pigment Ink DTF Printer and Hot Melt Powder(polyamide). Print the image mirrored using DTF or DTG printer with pigment inks (not textile inks), color first then white under base on top. Apply hot melt powder on printed area while ink is still wet, shake off any excess powder from non printed area. Bake or heat up the sheet to melt the powder so it can bond to the ink.Heat press may be used, hover the platen over the sheet about 1/2-1 above for 3 minutes at 350F. For convectional oven, set temperature 250-260 and bake for 60 sec to 90 sec. Garment Transfer: heat up the press - 315-330 F - Medium/Heavy Pressure 15 seconds - Cold Peel (diagonal direction roll peel).
Repress 5 seconds with Parchment Paper on top. Works on cotton, cotton/poly, and polyester too. (not tested on nylon, leather or elastic compressed polyester). Use black powder for black garment for best result. Always Keep inside the bag, store in cool dry area, avoid direct sunlight and moisture.We use this product(s) for our t-shirt orders too, and all DTG jobs have been replaced to DTF. Ships from California via UPS Ground. The item "100 SHEETS, DTF Printer, Digital Transfer PET Film, A3 (11-3/4 x 16-1/2)" is in sale since Monday, December 28, 2020.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Transfers". The seller is "sactshirt" and is located in California. This item can be shipped to United States.