It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. 15" x 11" (38 x 28cm). Heat platen with a full range of heating coils to allow for consistency throughout its surface.
The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from. 0 - 250 (about 480). Large 15" x 11" transfer element.
The 15" x 11" (38 x 28cm) heat platen provides a big surface to transfer onto flat surfaced items such as T-shirts, ceramic plates, mouse pads, jigsaw puzzles etc. Preset the desired temperature and timer. Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design.
Allows the heating element to be moved safely aside and reduce the chances of accidental contact. This allows the pressure to be adjusted according to the thickness of the material you're transferring to. The surface is non-stick, preventing scorching of transfers, and does not require a separate silicone/teflon sheet. Comfortable rubber grip for everyday use and long production runs.It is elevated with dual supports. Allows pressure to be more evenly distributed across the entire platen when it is closed. Built-in structural support to maintain flatness. Warm up quickly and offer even heating. Press the "SET" key for the first time, the indicator TEMP is on. Press or (increase or decrease) to set the needed temperature. Pressthe "SET"keyfor the second time, the indicatorTIME is on, Press or (increase or decrease) to setting the needed time. (Normally the time is 180 seconds for mugs and 15-20 seconds for t shirt printing). Press "SET" for the third time, the machine enters the heating state, and the OUT indicator is on. When the temp reaches the set value, the OUT indicator flashes. Press the "START" key, the machine starts to count down, the "TIME" indicator flashes. After thecountdown ends, the machine emitsa beep sound. Press the "STOP" key, and the machine enters the waiting state. 1st Unplug the aviation plug, Then connect the mug press parts through the aviation plug, pay attention to the position of the connector when plugging and unplugging. 2nd If you want to replace other types of mug press, you only need to operate on the mug press parts, do not plug in or unplug the aviation plug. 5/6 inches press pad change. 1stTakeoff the heating pad and Unplug the aviation plug. 2nd Connect the aviation plug and connect the 5 or 6 inches press pad with two screws.
Different products require different temperatures, times, and pressures. The first printing is recommended to be tested with small samples. After the test is successful, it is transferred in batches to avoid unnecessary waste.Do not tear off the high temperature cloth on the machine. Fahrenheit and Celsius scale are selectable. Detached cradle for use of the mug elements. Compact size and lightweight, as compared to standard mug cradles. 110v - with US Plug. 0 - 480 Fahrenheit degree (0 - 250 Centigrade). 5.5"x 3.15". 3"-3.5" diameter(11oz). Fully-assembled machine with platen press.
Brand new 8 in 1 heat press machine. Provides a big surface to create your own custom T-shirt. Temperature: set the desired temperature. Timer: set the desired time.
Allows the heating element to be moved safely aside. Can be adjusted according to the thickness of the material. Draw down the handle and wait until it alerts. Removable silicone pad and cotton pad. Built-in fuse for safe using.The item "8 in 1 Heat Press Machine Digital Transfer Sublimation for T-Shirt Mug 11 x 15" is in sale since Tuesday, December 15, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses". The seller is "crayola-6" and is located in New York City. This item can be shipped to United States.